Installing Acoustic Panels to the Wall: 4 Easy Steps

Installing Acoustic Panels to the Wall: 4 Easy Steps

Acoustic panels are a fantastic way to achieve exceptional soundproofing in any space, and Olanglab offers a selection of visually appealing and incredibly effective acoustic panels for you to pick from. It is possible, though, that you have some inquiries regarding the installation process of these panels. Thankfully, most acoustic panel installations are fairly simple, and you can frequently install them without the help of a professional on the same day that you receive them.


Ease of Installation with 4 Easy Steps

Installing acoustic panels is a relatively simple process that can greatly improve the sound quality of a room. Here's a basic guide in four easy steps:

1. Preparation

Materials and Tools

  • Olanglab acoustic panels 
  • Measuring/ adhesive  tape
  • Pencil
  • Level
  • Drill
  • Screws and wall anchors (if not provided with panels)
  • Screwdriver or drill bit
  • Stud finder (optional)
  • Wear some comfy cotton gloves to prevent any mishap.

2. Measurement

According to the size of the panel measure the position for installation.First, you need to consider the layout.

Plan the Layout

    • Decide where you want to install the panels based on the acoustic needs of the room. Typically, panels are placed on walls where sound reflection is a concern.
    • Use a measuring tape and pencil to mark the locations for each panel. Make sure to space them evenly for uniform sound absorption.
    • Use a level to ensure the panels will be installed straight.


3. Installation: Mount the Panels

  • If you're using panels with built-in mounting hardware, follow the manufacturer's instructions. Many panels come with simple sawtooth hangers or keyhole slots.
  • If your slats don't have mounting hardware, you'll need to attach them using screws and wall anchors. Use a drill to create pilot holes for the screws, and then secure them to the wall.
  • If you're attaching them to drywall, it's best to screw them into wall studs for stability. To locate the studs use a finder.

4. Test and Adjustment

Once all panels are installed, test the room's acoustics by clapping your hands or playing music.

Make adjustments as needed. You might need to reposition panels or add more in specific areas to achieve the desired sound balance.

If you're unsure about the placement, consider consulting with an acoustics professional.

Remember, the effectiveness of acoustic treatment depends on factors like the type of panels used, the room's size, and the specific acoustic issues you're addressing. Experimentation and adjustment may be necessary to achieve the best results.


How to Install Olart Acoustic Panels Effortlessly? 

Effortless Installation of Olart Acoustic Panels: A Professional Guide

Achieving optimal acoustic performance with Olart Acoustic Panels is not only effective but also remarkably simple. Follow this professional guide for a seamless installation process that ensures minimal time investment and long-lasting effectiveness.


Before you begin ensure that your walls are pristine. Cleanliness is paramount for the adhesive to bond effectively. Wipe away any dust, and confirm that the walls are dry.


Equip yourself with a pair of scissors and cut the double-sided tape into 6-8 sections for each panel. Precision in cutting ensures that the tape will be perfectly sized for easy application.


Place the cut tape strategically on the back of each panel. Aim for the four corners and the center, creating a robust tape framework. The careful distribution of tape ensures that the panel adheres securely to the wall.


With the tape in position, it's time to affix the panel to the desired location on the wall. Peel off the protective film from the tape, revealing the adhesive surface. Position the panel with precision and press firmly from the center outward. Applying pressure for at least 5 seconds ensures a strong bond.


Pro Tip

When choosing the panel placement, consider the acoustic needs of the room. Experiment with different locations to find the optimal configuration for sound absorption.

Additional Considerations:

For a sleek finish, ensure that the panels are aligned evenly, using a level if necessary.

If you're installing multiple panels, maintain consistent spacing for a visually appealing and acoustically effective result.

Maintenance Tips

To preserve the longevity of the acoustic panels, avoid exposing them to excessive moisture or direct sunlight. Regularly dusting the panels will help maintain their effectiveness over time.

In conclusion, the installation of Olart Acoustic Panels is a straightforward process that can be accomplished with ease. By following these steps diligently, you not only ensure the immediate effectiveness of the panels but also contribute to the creation of a visually pleasing acoustic environment. Elevate your space with the power of sound management through the effortless installation of Olart Acoustic Panels



How are acoustic ceiling panels installed?

A: Acoustic ceiling panels are typically installed using one of the following methods:

Direct Mounting: Attach the panels directly to the ceiling using screws or adhesive.

Suspended Grid: Install a suspended grid system and hang the panels within the grid.

Cloud Mounting: Hang the panels individually from the ceiling to create a "cloud" effect.


Follow the manufacturer's instructions for your specific panels, as installation methods can vary.


How do you attach felt panels to the wall?

A: These can be attached to the wall using a variety of methods:

Adhesive: Use a strong adhesive suitable for both the wall surface and the material of the felt panels.

Hook-and-Loop Fasteners: Attach hook-and-loop strips to the back of the panels and the corresponding strips to the wall.

Mounting Hardware: Some felt panels come with built-in mounting hardware, such as sawtooth hangers or keyhole slots.

Ensure the wall is clean and dry before attaching the panels, and follow the manufacturer's guidelines.

Should acoustic panels be placed behind speakers?

Placing them behind speakers can be beneficial, especially if you are dealing with sound reflections or echoes. However, the ideal placement of acoustic panels depends on the specific acoustic issues in your room.

Experiment with different panel placements, including behind speakers, to find the configuration that provides the best acoustic treatment for your space.


How do you install PET acoustic panels?

A: These are designed to absorb sound while being PET-friendly, and can be installed similarly to regular acoustic panels.

Follow the manufacturer's instructions for installation, which may involve using adhesive, mounting hardware, or other recommended methods.

Consider the location of the panels and ensure they are securely attached to prevent pets from dislodging them.